Charles "Chuck" Ginnever

Early life

Charles Ginnever was born in San Mateo, California, in 1931. In 1953 he went to Paris, where he attended classes taught by the sculptor Ossip Zadkine at the Académie de la Grande Chaumière. His European tour lasted two years, during which time he travelled throughout France and Italy and absorbed as much as he could from the many museums he visited. Upon returning to his native California, he enrolled at the California School of Fine Arts, (now the San Francisco Art Institute) where he studied photography and sculpture from 1955 to 1957, and where he befriended the sculptor Peter Forakis.

1957 was a pivotal year for Ginnever, when he drove from San Francisco to New York with fellow sculptor Mark di Suvero. On the week-long journey cross-country, Ginnever and di Suvero spent their time discussing abstract expressionism and concluded that sculpture, "hadn't matched the accomplishments in painting", and they were determined to correct that. Dropping di Suvero off in New York City, Ginnever continued on to Cornell University, where he had accepted a teaching position and where he simultaneously completed his MFA in 1959. It was during this period that Ginnever, inspired by calligraphy, made such seminal works as Oxbow, Calligraph and Ithaca, all incorporating found materials such as wood, railroad ties and steel, that not only marked his departure from the "carve-direct/modeling orientation to sculpture" from which he and di Suvero initially evolved, but paved the way to a new form of sculptural expression where sculpture not only occupied space but, according to Carter Ratcliff, did so by "reaching into it". This would prove to be the defining moment in Ginnever's career when his sculpture would eliminate its reliance on the pedestal or base.

After the incorporation of found, bent steel pieces in his railroad tie sculpture of 1959 entitled Ithaca, started while still at Cornell and completed when Ginnever moved to New York City, steel became the primary medium for his work, and has remained so ever since.

1960s

In the early 1960s, Ginnever's sculpture, much like that of his acquaintance and contemporary John Chamberlain, included "buckled and crunched automobile skins – hoods and fenders – combined with warped, distorted skeletal members of demolished buildings" and in Ginnever's case, sometimes incorporating painted fabric. But, whereas Chamberlain relied on the color of the found metal objects for their color composition, Ginnever painted his pieces to achieve their color compositions (a technique that Chamberlain would utilize in his later pieces[). Also, whereas Chamberlain's pieces relied on their forms being crunched and are somewhat static, Ginnever's incorporated open volumes delineated by the sculptures' elements which included crunched steel. The combination of open and closed forms in Ginnever's sculptures then becomes animated by the viewer's participation when walking around the piece.

The idea of the viewer as an active participant was brought to its apex in the "Happening", an art form whose name was coined by artist Allan Kaprow. In 1962, Ginnever produced and directed a "multimedia many-act event, best described as a 'happening'", that was held first in Woodstock and then Bridgehampton, New York in the same summer. Among the many artists and performers Ginnever invited to participate in his artist carnival were Allan Kaprow, Walter de Maria, Peter Forakis, Tom Doyle, Eva Hesse, and the Bread and Puppet Theater. One of the many events of Ginnever's artist carnival included a "Sculpture Dance" entitled Ergo Suits, in which Ginnever, Tom Doyle and Eva Hesse took part, and each of the artists made their own wearable sculptures. This event marked Hesse's first sculpture and Ginnever's first foray into the art of Happenings.

The sixties saw the emergence of both Minimal and Conceptual art, and although Ginnever's own work does not fall under the rubric of these movements, he was an active participant in them. In 1968, while head of the art department at Windham College in Vermont, Ginnever invited artists Carl Andre, Robert Barry and Lawrence Weiner to create site-specific outdoor works that were exhibited on the campus of the college.The exhibition included a symposium hosted by Ginnever, in which the artists were given the opportunity to speak about their work. This event, transcribed and disseminated throughout the art world by the freelance curator Seth Siegelaub, had lasting effects on the movement and marked important milestones in the careers of the artists who participated.

1970s

Ginnever's 1964 sculpture Dante's Rig, his first made from purchased materials, marked another important turning point in his career and set the stage for much of his later work. According to Carol Squiers, "Dante's Rig explored non-western art ideas, especially about perspective," and "spawned a series of pieces based on the support system itself, and another series based on the aluminum sections, which foreshadowed his interest in 'forced illusory perspective'". From Dante's Rig, one can clearly see a linear progression in his major works from the 1970s and 1980s. Squiers goes on to say,

By solidifying the negative space in Fayette, 1966-71, Ginnever produced Détente, 1974. In the same way, by heightening the Renaissance perspective of the framework of Ithaca, he made Zeus, 1975, and Wakanhdi, 1976. Three Steel Plates, 1977, is a combination of both these derivations. Three cor-ten steel plates, each 5/8" X 5' X 22', are hung from steel cables and shackled together in a zigzag pattern. Each touches the floor at one end and then angles up, recalling both the slanted negative space of his "squashed box" pieces (Fayette, Troika), and the exaggerated perspectival lunges of Zeus and Wakanhdi, which extend and flatten space all at once. The sheets, poised on one point, each deceptively deny their own extreme weight.

By the late 1970s, Ginnever was also among the first members of ConStruct, the artist-owned gallery that promoted and organized large-scale sculpture exhibitions throughout the United States. Other founding members included John Raymond Henry, Kenneth Snelson, Lyman Kipp and Mark di Suvero.

Ginnever has been preoccupied with the notion of western perspective for many years, and continuously challenges the viewers of his work in this respect. Ginnever states, "The sculpture is not made to trick anybody. It's just that [in] the way they are placed, they challenge our perception. Renaissance perspective was invented to help painters and draftsman extend the appearance of depth on the picture plane. Perspective has nothing to do with how forms of sculpture actually appear. Yet we expect things to behave in a certain way, which my sculptures intentionally refuse to do." As Mary Maggini points out in a catalogue essay about Ginnever's work, by "manipulating the appearance of depth and dimension, movement, and space", Ginnever presents the viewer with "a different work of art that vacillates between flattening into a one dimensional plane to expanding, or sometimes exploding, into three dimensions." Thus, when walking around one of Ginnever's sculptures, viewers are challenged when what they thought they would see at another viewpoint turns out to be a completely different form from what they expected, and they are left questioning if they are even viewing the same piece.

Later work

Most of Ginnever's sculptures since the early 1990s are capable of assuming multiple positions while retaining their integrity in each position. Writing about these works, J.R. Leibowitz states, "An artist reviewing the Ginnever sculpture would immediately recognize that it works in every direction; in any pose, artistic weight is balanced." One such piece, entitled Rashomon, is capable of assuming 15 different positions. Titled after a film by Akira Kurosawa that tells the same story four times from four distinct perspectives, Ginnever's Rashomon "slips from whatever mental grasp of it a viewer may have won" whenever it is placed in a new position.

In 2000, Kenneth Baker sums up Ginnever's work for the past three decades by stating, "His intention for Rashomon is as elemental as its design. In a society in which the integration of space and time is consigned to the realm of idea rather than that of direct physical experience, the work proposes to return human perception to its original state."

Ginnever continues to work on sculpture, drawings and printmaking, primarily at the studios on his sculpture farm in Putney, Vermont.

Education/Distinctions

1949-51 San Mateo Junior College, San Mateo, California, A.A.

1953 Alliance Francaise, Paris, France

1954 Universita per Stranieri, Perugia, Italy

1953-55 Academie de la Grande Chaumiere, Paris, France under Ossip Zadkine

1955 Atelier 17, Paris, France, under Stanley W. Hayter

1955-57 California School of Fine Arts (San Francisco Art Institute), B.A.

1957-59 Cornell University, Ithaca, NY, M.F.A.

https://en.wikipedia.org/wiki/Charles_Ginnever